The MT300 Gap Film Covering Machine is an automated production equipment that can achieve the covering of reflective gap films between strings and cells on module glass.
Features
1. Compatible with conventional double glasses versions of 182 and 210 cells, and has the function of surrounding film covering;
2. The design of the film strip roll feeding station is located on the outside of the equipment, making it easy to operate;
3. Film parameters can be switched with one click;
4. Support horizontal and vertical feeding methods, with strong adaptability;
5. Optional film appearance detection function, real-time film detection, to avoid the occurrence of defects.
Specifications
|
í—Ä¿ |
…¢”µ |
|
Module specifications |
L 1750-2500£¨mm£©, W 1100-1400£¨mm£© |
|
Cycle time |
¡Ü12 seconds/module |
|
Film temperature setting |
100-400¡æ |
|
Deviation between the center position of the film and the theoretical standard center |
¡À0.5mm (excluding glass size error) |
|
Deviation in straightness of a single film after film application |
¡À0.5mm/m |
|
Film specifications |
Film width 3.5¡«12mm |
|
Film roll specifications |
Outer diameter of film roll ¦Õ 150mm~ ¦Õ210mm Inner diameter of film roll ¦Õ 20mm~ ¦Õ 25mm Width of film roll ¡Ü 210mm |
|
Module input height |
950¡À20mm |
|
Overall dimension Power source |
L 4300 ¡ÁW 3340 ¡ÁH 2560£¨mm£© Three-phase five-wire 380VAC ¡À 5% 50/60Hz |
|
Power |
Average of about 25KW/peak value 60KW |
|
Air source |
Pressure 0.6~0.8Mpa flow rate 2.8m³/min |