This equipment adopts XN IFC technology, which is compatible with TOPCon, HJT and XBC 0BB cells.
F Features
1. One equipment with multiple uses, compatible with TOPCon, HJT and XBC 0bb cells.
2. The cells, wires, and films are directly covered in a string in one time, no need to cover wires and films in advance, resulting in high production efficiency;
3. Low temperature, low stress connection, suitable for thinner cells;
4. The double film is fed independently. The front and back film can be made of different materials, and the film roll can be reloaded without stopping to improve the up time;
5.The double film is fed independently.The front and back film can be made of different materials, and the film roll can be reloaded without stopping to improve the up time;
6. No flux,green and environmentally friendly.
Specifications
|
í—Ä¿ |
…¢”µ |
|
Capacity of dual lanes |
TOPCon & HJT£º10000+ half cell/hour£» BC£º8000 half cell/hour |
|
Compatible wires No. |
9-30 wires |
|
Film covering heating method |
Infrared low-temperature heating |
|
Cutting method |
Non-destructive cutting |
|
Cell specifications |
Cell size 182~230mm Thickness 90~200¦Ìm |
|
Film specification |
Width 178-230mm |
|
Cell to cell gap |
-1~6 mm |
|
Wire specifications |
Round, diameter ¦Õ0.15~¦Õ0.35mm Flat, width: 0.4~0.8mm; wire thickness: 0.15~0.3mm |
|
Overall dimension |
L 9800 ¡ÁW 4020 ¡ÁH 2690 (mm) |
|
Power source |
Three phase five wire 380VAC¡À5% 50/60Hz |
|
power |
Average value about 30KW/peak value 60KW |
|
Air source |
Pressure 0.6~0.8Mpa flow rate 6.0m³/min |